Skip to main content
P

C94-M8P

u-blox RTK application board package

Highlights

  • Based on u‑blox NEO‑M8P‑2 module
  • Application board for professional prototyping
  • Easy integration of RTK high accuracy solutions
  • Base and rover functionality
  • Integrated radio link
u-blox C94 high precsion evaluation board

    Product variants

    C94-M8P-1

    China (433 MHz)

    C94-M8P-2

    USA and Canada (915 MHz)

    C94-M8P-3

    Europe (433 MHz)

    C94-M8P-4

    Japan (920 MHz)

    The C94‑M8P application board allows efficient integration and evaluation of NEO‑M8P, u‑blox’s M8 high precision positioning module.
    The NEO‑M8P module series introduces the concept of a "Rover" and a "Base Station", bringing RTK technology to u‑blox’s product portfolio. By using a data stream from the base station, the rover can output its relative position with stunning cm‑level accuracy in
    clear sky environments.
    The C94‑M8P application board integrates NEO‑M8P‑2 module with both base station and rover functionality. The C94‑M8P includes a UHF radio link, allowing for easy setup and fast prototyping. The board also provides connector pins for u‑blox C027 and other application boards, enabling communication alternatives using u‑blox cellular and short‑range technologies.

    • 2 application boards (both with NEO‑M8P‑2)
    • 2 external UHF antennas
    • 2 external active GNSS antennas
    • 2 antenna ground planes
    • 2 micro‑USB cables
    • Receiver:  NEO‑M8P‑2 GNSS module with support for both active and passive antennas
    • Radio link:  UHF operation in the license free bands. See product variants.

    C94‑M8P board schematic is available on request.

    Release Notes

    u-blox M8 HPG 1.40 Firmware 3.01 for NEO-M8P Release Note

    29-Jun-2017

    244 KB
    u-center, Version 19.02 Release Notes

    18-Mar-2019

    153 KB
    u-blox M8 HPG 1.30 Firmware 3.01 for NEO-M8P Release Note

    30-Jan-2017

    166 KB
    u-blox M8 HPG 1.20 Firmware 3.01 for NEO-M8P Release Note

    19-Oct-2016

    114 KB
    u-blox M8 HPG 1.11 Firmware 3.01 for NEO-M8P Release Note

    31-May-2016

    253 KB
    u-blox M8 HPG 1.00 Firmware 3.01 for NEO-M8P Release Note

    04-Mar-2016

    287 KB

    Firmware Update

    u-blox M8 Flash Firmware 3.01 HPG 1.40 - ONLY for High Precision GNSS products, NEO-M8P and C94-M8P (NOT for Standard Precision, Timing or Dead Reckoning products)

    29-Jun-2017

    932 KB
    u-blox M8 Flash Firmware 3.01 HPG 1.30 - ONLY for High Precision GNSS products, NEO-M8P and C94-M8P (NOT for Standard Precision, Timing or Dead Reckoning products)

    30-Jan-2017

    879 KB
    u-blox M8 Flash Firmware 3.01 HPG 1.20 - ONLY for High Precision GNSS products, NEO-M8P and C94-M8P (NOT for Standard Precision, Timing or Dead Reckoning products)

    19-Oct-2016

    819 KB
    u-blox M8 Flash Firmware 3.01 HPG 1.11 - ONLY for High Precision GNSS products, NEO-M8P and C94-M8P (NOT for Standard Precision, Timing or Dead Reckoning products)

    31-May-2016

    931 KB