MAX-F11/M11 系列
u-blox 11 标准精度 GNSS 模块
UBX-F11 系列
u-blox F11 标准精度 GNSS 芯片
超低功耗 GNSS，支持无缝 L1/L5 双频段使用，可在各种环境下实现最佳精度
- 在低能耗精确定位（LEAP）模式下为 7 mW
- 选择性使用 L5 频段，以实现功耗与精度的最佳平衡
- 单芯片支持 L1 或 L1/L5 频段
- 针对特定应用的专用模式，便于实现
- 可升级固件和嵌入式闪存
Standard
Professional
Automotive
Product variants
UBX-F11070-KB
u-blox F11 ROM GNSS芯片，28 QFN封装，默认配置为GPS/GAL/BDS
Buy Now
UBX-F11170-CC
u-blox F11 GNSS芯片，33针WL-CSP封装，默认支持GPS/GAL/BDS，固件可升级
Buy Now
UBX-F11270-KB
u-blox F11 GNSS 芯片，28 引脚 QFN 封装，默认配置为 GPS/GAL/BDS，支持固件升级，内置闪存
Buy Now
相关链接
产品选择
产品描述
文档与资源
| Product variants | UBX-F11170-CC | UBX-F11270-KB | UBX-F11070-KB |
|---|---|---|---|
| GNSS | BeiDou, Galileo, GPS / QZSS, NavIC, SBAS | BeiDou, Galileo, GPS / QZSS, SBAS | |
| GNSS bands | L1/L5 | B1C, B1I, E1B/C, L1C/A | |
| Oscillators | Crystal supported, TCXO supported | ||
| UART | ✓ | ||
| SPI | ✓ | - | ✓ |
| I2C | ✓ | - | ✓ |
| Maximum supply [V] | 1.8 | ||
| Minimum supply [V] | 0.9 | ||
| Maximum temperature [°C] | 85 | ||
| Minimum temperature [°C] | -40 | ||
| Antenna supervisor | ✓ | ||
| Firmware upgradable | ✓ | - | |
| RTC crystal | ✓ | ||
| Time pulse output | ✓ | ||
| >99% precise odometer | ✓ | - | |
| Indoor detection | ✓ | - | |
| LEAP | ✓ | ||
| Selective L5 | ✓ | - | |
| Carrier phase output | ✓ | - | |
| Data batching | ✓ | ||
| Data logging | ✓ | ||
| Geofencing | ✓ | ||
| Programmable flash memory | - | ✓ | - |
| Dimensions [mm] | 2.39 x 2.39 x 0.36 | 5.0 x 5.0 x 0.55 | |
| AssistNow | ✓ | ||
| CloudTrack | ✓ | ||
No results have been found for .