u-blox

EVK-NORA-B2

Evaluation kit for NORA-B2 stand-alone modules with Bluetooth LE 6.0 long range, NFC, and Thread/Zigbee

Highlights

  • All NORA-B2 module pins are available at connectors
  • Can be powered through USB, external power supply, or coin cell battery
  • Has onboard debugger hardware and firmware
  • Open CPU with nRF Connect SDK or pre-flashed with u-connectXpress software
short_range

Product variants

EVK-NORA-B201

Evaluation kit for NORA-B201, open CPU, Stand-alone Bluetooth Low Energy, Antenna pin, USB interface
Buy Now

EVK-NORA-B206

Evaluation kit for NORA-B206, open CPU, Stand-alone Bluetooth Low Energy, Internal PCB antenna, USB interface
Buy Now

EVK-NORA-B261

Eval. kit NORA-B26 Bluetooth modules u-connectXpress AT-command software Antenna pin, USB-interface
Buy Now

EVK-NORA-B266

Eval. kit NORA-B26 Bluetooth modules u-connectXpress AT-command software Internal antenna, USB-interface
Buy Now
Related links
EVK-NORA-B2 User Guidefile icon
EVK-NORA-B26 User Guidefile icon
NORA-B2 Open CPU Data sheetfile icon
NORA-B2 u-connectXpress Data Sheetfile icon
NORA-B26 u-connectXpress AT commands manualeye icon
Product description
Kit includes
Documentation & resources

The EVK‑NORA‑B2 evaluation kit is a versatile development platform that allows quick prototyping of a variety of Bluetooth® LE, Thread, Zigbee, and NFC™ applications on the NORA-B2 module series. 

All features of the NORA-B2 module are easily accessed from the evaluation board. Four user buttons are available, as well as a user RGB LED, 64 Mbit external flash memory, and a reset button. All GPIO signals are available on the two mikroBUS™ form factor compatible sockets, or the 2.54 mm pitch holes/headers. This allows easy use of mikroBUS™ add-on boards. I2C sensors can be connected via the Qwiic system connector. A current sense header is provided for measuring current into the module. 

A USB connection provides power and virtual COM ports. The board can also be powered from an external supply or a coin cell battery. Programming and debugging over SWD is done either with external debugger or with the on-board debugger chip. 

The EVK supports evaluation of both the embedded antenna as well as an external antenna of choice. There is also a variant for u‑connectXpress software.

Further products

No results have been found for .