Skip to main content
P

C94-M8P

u-blox RTK 应用板封装

Highlights

  • 基于 u‑blox NEO‑M8P‑2 模块
  • 专业原型设计用应用板
  • 轻松集成 RTK 高精度解决方案
  • 基准站和流动站功能
  • 集成无线电链路
u-blox C94 high precsion evaluation board

    产品变型

    C94-M8P-1

    China (433 MHz)

    C94-M8P-2

    USA and Canada (915 MHz)

    C94-M8P-3

    Europe (433 MHz)

    C94-M8P-4

    Japan (920 MHz)

    The C94‑M8P application board allows efficient integration and evaluation of NEO‑M8P, u‑blox’s M8 high precision positioning module.
    The NEO‑M8P module series introduces the concept of a "Rover" and a "Base Station", bringing RTK technology to u‑blox’s product portfolio. By using a data stream from the base station, the rover can output its relative position with stunning cm‑level accuracy in
    clear sky environments.
    The C94‑M8P application board integrates NEO‑M8P‑2 module with both base station and rover functionality. The C94‑M8P includes a UHF radio link, allowing for easy setup and fast prototyping. The board also provides connector pins for u‑blox C027 and other application boards, enabling communication alternatives using u‑blox cellular and short‑range technologies.

    • 2 application boards (both with NEO‑M8P‑2)
    • 2 external UHF antennas
    • 2 external active GNSS antennas
    • 2 antenna ground planes
    • 2 micro‑USB cables
    • Receiver:  NEO‑M8P‑2 GNSS module with support for both active and passive antennas
    • Radio link:  UHF operation in the license free bands. See product variants.

    C94‑M8P board schematic is available on request.

    快速入门

    C94-M8P Application Board Setup

    18-Oct-2017

    1 MB

    用户指南

    u-center User Guide

    30-Oct-2019

    5.91 MB
    C94-M8P Application Board User Guide

    07-Jul-2017

    1.6 MB

    数据表

    NEO-M8P Data Sheet

    06-Nov-2017

    1.86 MB

    集成手册

    NEO-M8P Hardware Integration Manual

    06-Jul-2017

    1.16 MB

    接口手册

    u-blox 8 / u-blox M8 Receiver Description, Protocol Specification

    28-五月-2019

    3.49 MB

    评估软件

    u-center for Windows, v19.10

    30-Oct-2019

    11.25 MB

    发布说明

    u-center, Version 19.10 Release Notes

    30-Oct-2019

    110 KB
    u-blox M8 HPG 1.40 Firmware 3.01 for NEO-M8P Release Note

    29-Jun-2017

    244 KB

    固件更新

    u-blox M8 Flash Firmware 3.01 HPG 1.40 - ONLY for High Precision GNSS products, NEO-M8P and C94-M8P (NOT for Standard Precision, Timing or Dead Reckoning products)

    29-Jun-2017

    932 KB