Skip to main content
로딩 중 ...

해당 국가 ! 국가

해당 국가 ! 국가

주소를 변경하세요
Search

You are here

백서


 

The state of affordable, scalable high precision GNSS location solutions for automotive and unmanned vehicle applications
2018 02 07
This paper discusses some use cases related to the adoption of cellular connectivity technology in alarm panels and connected buildings, and how manufacturers of such devices can improve their time to market, enrich the feature set, and enhance the added values of their applications when adopting cellular and short range connectivity modules.
2017 09 29
Super-E in wearables
<p>Super-E로 휴대용 애플리케이션을 위한 GNSS 솔루션의 크기와 성능의 최적화 밸런스를 찾아보세요.</p>
2017 09 13
GNSS 패치 안테나 설계에서 크기와 성능간의 최적의 균형을 찾는 방법은?
2017 05 22
wireless medical devices
With the advent of wireless technology in medical applications, new possibilities open up for medical diagnostic and monitoring equipment in a hospital, health care facility, or for care in the home environment.
2016 09 15
antenna
In this white paper, u‑blox shows how inexpensive patch antennas can be used to achieve centimeter‑level accuracies using the u‑blox NEO‑M8P receiver.
2016 07 21
udr
UDR is Dead Reckoning without the need for an electrical connection to the car.
2016 02 01
100m
This paper discusses the topic of the “last 100 meters connectivity” in systems where small devices (such as various sensors) are connected to services on a wide‑area Internet network.
2015 02 09
Bluetooth low energy
With yearly shipments of more than 10 billion microcontrollers that all can exchange information locally or through the Internet, a huge variety of so called “intelligent devices” are enabled. All these devices can be accessed over the Internet and this evolution is commonly referred to as Internet of Things (IoT)
2014 12 05
gps
As more and more products and devices integrate global positioning as a standard feature, a performance optimized “GNSS antenna module” which combines both satellite receiver chip and antenna on the same module can be a good solution.
2014 04 01
cell
Precision timing based on GNSS satellites is a low‑cost, reliable, and ubiquitously available reference time derived from satellite‑hosted atomic clocks.
2013 12 01
lte
Service providers around the world are spending billions of dollars rolling out new LTE infrastructure.
2013 11 01
ecall
With the imminent deployment of European eCall in 2018, development of In‑vehicle eCall Systems (IVS) is in full swing.
2013 10 01
4g
LTE is the latest generation mobile network technology, and the fastest growing standard in telecoms history.
2013 06 01
m2m
2013 was the year when machine‑to‑machine (M2M) communications exceeded human‑to‑human communications for the first time in history, with even more machines connected to the Internet than people.
2013 03 01
philo
Focus on compatibility and upgradeability: In today’s electronics industry, particularly for industrial machine‑to‑machine (M2M) applications such as fleet and asset management systems, product cycles are short, typically 9 months to a year for each product upgrade cycle, with overall product life‑span lasting up to 10 years.
2012 11 01
umts_gps.png
The combination of mobile communications with global positioning, Internet and multimedia services in small, portable devices has become an accelerating industry trend, particularly for mobile resource management systems, connected automotive navigation systems and handheld consumer products.
2012 02 01
cellocate
Although GPS is a widespread technology, GPS positioning is not always possible, particularly in shielded environments such as indoors and enclosed park houses, or when a GPS jamming signal is present.
2011 07 01
adr
Increasingly dense urban environments pose a significant problem to navigation systems based on the reception of extremely weak GPS satellite signals.
2010 08 01