Skip to main content

Please note that u‑blox no longer supports Internet Explorer.

We recommend using the latest version of Google Chrome or Firefox.


UBX-G6010-ST-TM chip

u-blox 6 Precision Timing GPS chip

UBX-G6010-ST-TM chip is an older generation product. For new designs see:
u-blox M8 concurrent GNSS timing modules


  • Precision Timing:
    • 2 timepulse outputs (up to 10 MHz)
    • Output timepulse with at least one satellite in view
    • Stationary mode for GPS timing operation
    • Time mark of external event inputs
  • Raw data
  • ROM-based for cost effectiveness
  • High level of design flexibility
  • Qualified according to AEC-Q100
  • Manufactured in ISO/TS 16949 certified production sites

Product variants


u-blox 6 GPS Precision Timing chip,
56 Pin MLF

Product variantsUBX-G6010-ST-TM
GNSS features 
OscillatorCrystal supported, TCXO supported
Microprocessor on board  
Standalone module open CPU
DDC (I2C compliant)1
Electrical data 
Minimum supply [V]1.75
Maximum supply [V]3.6
Environmental data, quality & reliability 
Maximum temperature [°C]85
Minimum temperature [°C]-40
Size [mm] 8 x 8 x 0.85
Active antenna / LNA supply
Additional LNA
Additional SAW
Antenna open circuit detection pin
Antenna short circuit detect / protect pin
Ext. interrupt /wakeup
Internal oscillator
Programmable flash memory
RTC crystal
Timepulse output

Product Summary

Integration Manual

Interface Manual

Application Note

Release Notes


Driver Guide

Information Note


White Paper

The UBX-G6010-ST-TM provides precision GPS timing for demanding positioning applications such as femto cells and WiMAX basestations. This GPS chip features user configurable frequency output and timepulse. An accuracy of up to 15 ns is achievable by using the quantization error information to compensate the granularity of the time pulse. The UBX-G6010-STTM features a time mode function whereby the GPS receiver assumes a stationary 3D position, whether programmed manually or determined by an initial self-survey. During stationary operation GPS timing is possible with only one visible satellite. This means that time can be output even under adverse signal conditions or in environments with poor sky visibility. A built-in time mark and counter unit provide precise time measurement of external event inputs. T-RAIM (Timing Receiver Autonomous Integrity Monitoring) is available to detect faulty GPS measurements. Raw data is also provided. The UBX-G6010-ST-TM is the ideal GPS chip solution for high-volume timing applications.