Skip to main content
P

NEO-7P module

u-blox 7 precise point positioning GNSS module

NEO‑7P module is an older generation product. For new designs see:
ZED-F9P
u-blox F9 high precision GNSS module
NEO-M8P series
u-blox M8 high precision GNSS modules

The economical choice for navigation performance

  • High precision GNSS < 1 m
  • DGPS by SBAS or RTCM
  • Combines low power consumption and high sensitivity
  • Simple integration with u‑blox cellular modules
  • Backward compatible with NEO‑6 and NEO‑5 families
  • Raw measurement data (GPS)
12.2 x 16 x 2.4 mm

Product variants

NEO-7P

u-blox 7 LCC Module, GNSS Precise Point
Positioning, Raw Data

Product variantsNEO-7P
Multi-GNSS
GNSS features 
OscillatorCrystal
Antenna 
Pin (active) for external antenna
Pin (passive) for external antenna
Area 
Global
Microprocessor on board  
Standalone module
Interfaces 
UART1
USB1
SPI1
DDC (I²C compliant)1
Electrical data 
Minimum supply [V]2.70
Maximum supply [V]3.6
Environmental data, quality & reliability 
Maximum temperature [°C]85
Minimum temperature [°C]-40
Size [mm]12.2 x 16 x 2.4
Features 
Programmable flash memory
RTC crystal
Internal oscillator
Antenna short circuit detect / protect pin
Antenna open circuit detection pin
Active antenna / LNA supply
Other 
MarketsIndustry, Smart Cities, Unmanned Vehicle

Overview

Product Summary

Data Sheet

Interface Manual

Application Note

White Paper

Driver Guide

Release Notes

Conformity Declaration

Driver

User Guide

Technical Note

The NEO‑7P module combines the high performance of the u‑blox 7 GNSS engine with precise point positioning (PPP) technology for GPS. u‑blox’ industry‑proven PPP algorithm, in combination with SBAS, provides exceptional precision in clear‑sky applications without the need for a reference station. This makes NEO‑7P the ideal solution for many applications in surveying, marine navigation, agriculture, sports and leisure. For world‑wide application, the NEO‑7P supports Differential GPS (DGPS) operation as an alternative to SBAS and PPP, using RTCM correction messages from a local reference station or aiding network. Ionospheric corrections received from regional SBAS satellites (WAAS, EGNOS, MSAS) enable the highest stand‑alone positioning accuracy from the PPP algorithm. u‑blox’ PPP also provides useful improvements in stand‑alone precision even without SBAS. PPP delivers its full benefits after the first few minutes of operation with an unobstructed sky view. The entire NEO‑7 series combines excellent sensitivity with low power and includes variants optimised for cost and performance. The industry‑proven NEO form factor allows easy migration from previous NEO generations. The NEO‑7P features a front‑end SAW RF filter for increased jamming immunity. This is reinforced by sophisticated RF‑architecture and interference suppression, ensuring maximum performance even in hostile signal environments. UART, USB and DDC (I2C compliant) interfaces provide flexible connectivity and synergies with u‑blox SARA, LEON and LISA cellular modules. The NEO‑7P’s internal Flash allows simple firmware upgrades. u‑blox 7 modules use GNSS chips qualified according to AECQ100 and are manufactured in ISO/TS 16949 certified sites. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.