Skip to main content
P

UBX-M8030-KT-FT Chip

u-blox M8 GNSS-gestützter Zeit- und Frequenz-Referenzchip

Führende Leistung selbst bei sehr schwachen Signalen

  • Simultanempfang von GPS/QZSS, GLONASS, BeiDou
  • Direkte Steuerung eines GNSS‑disziplinierten Systemreferenz‑Oszillators
  • Präzise Messung und Steuerung von externen Oszillatoren
  • Branchenweit führende Aufstart‑Empfindlichkeit und Single‑Satellite Timing
  • Automatisches Holdover
  • Vorbereitet für die Integration mit externem PTP, Sync‑E und Network Listen
5 x 5 x 0.59 mm
  • Standard
  • Professional
  • Automotive

Produktvarianten

UBX-M8030-KT-FT

u-blox M8 GNSS chip, Time & Frequency
reference, 40 Pin QFN
 

ProduktvariantenUBX-M8030-KT-FT
Concurrent GNSS
GNSS features 
OscillatorCrystal supported, TCXO supported
Antenne 
Pin (active) for external antenna
Pin (passive) for external antenna
Area 
Global
Interfaces 
UART1
USB1
SPI1
DDC (I²C compliant)1
Electrical data 
Minimum supply [V]3.0
Maximum supply [V]3.6
Environmental data, quality & reliability 
Maximum temperature [°C]85
Minimum temperature [°C]-40
Size [mm] 5 x 5 x 0.59
Features 
Programmierbarer Flash-Speicher
Data logging
RTC Quarz
Internal oscillator
Other 
MärkteSmart Cities, Infrastruktur

u‑blox time and frequency products provide multi‑GNSS synchronization for cost‑sensitive network edge equipment including Femto wireless base‑stations. The M8030‑KT‑FT IC provides a complete GNSS receiver and reference frequency control function. This single‑chip RF and baseband IC requires few external components: just a low‑cost SQI Flash for program and parameter storage and passive components. The M8030‑KT‑FT can control a system reference VCTCXO directly via its in‑built PWM DAC, providing both frequency and phase coherence with the best available source of synchronization. Additional remote oscillators may be controlled via a second DAC (DDC) or via the host system. External sources of synchronization are supported through time‑pulse and frequency inputs and a message interface. This allows measurements from macro‑sniff, Sync‑E, or packet timing to be combined with measurements from GNSS. u‑blox time and frequency products include timing integrity alarms that report phase and frequency uncertainty both during normal operation and hold‑over. They feature a high dynamic range radio with both analog and digital interference mitigation supporting their inclusion as an integral part of a local area base station design. Example application (Residential Femto Cell) In a Femto‑Cell application, the M8030‑KT‑FT can make fine adjustments to the master reference frequency oscillator to precisely align the Femto‑cell transmit framing with a phase reference from GNSS or PTP. In the absence of a reliable source of synchronization, the M8030‑KT‑FT automatically manages hold‑over based on the stability of the oscillator selected, allowing the Femto‑cell to continue transmissions. The M8030‑KT‑FT estimates phase and frequency uncertainty continuously during hold‑over so the host system can decide when to discontinue transmission.