Skip to main content
P

UBX-G8020 Chip

u-blox 8 GNSS-Chip

Highlights

  • GNSS‑Technologie für GPS/QZSS und GLONASS
  • Hohe Empfindlichkeit von –166 dBm
  • Niedriger Energieverbrauch
  • Hochentwickelte Erkennung von Störsignalen und Spoofing Detection
  • Herausragende Leistung bei Geräten, die am Handgelenk getragen werden
  • Pin‑kompatibel zu UBX‑G7020‑KT und UBX‑M8030
5 x 5 x 0.59 mm
  • Standard
  • Professional
  • Automotive

Produktvarianten

UBX-G8020-KT

u-blox 8 GNSS chip, 40 Pin QFN

ProduktvariantenUBX-G8020-KT
GNSS features 
GNSSGLONASS, GPS/QZSS
Number of concurrent GNSS1
Multi-GNSS
OscillatorCrystal, TCXO
Area 
Global
Mikroprozessor 
Standalone module
Interfaces 
UART1
USB1
SPI1
DDC (I²C compliant)1
Electrical data 
Minimum supply [V]1.4
Maximum supply [V]3.6
Environmental data, quality & reliability 
Maximum temperature [°C]85
Minimum temperature [°C]-40
Size [mm]5 x 5 x 0.59
Features 
Programmierbarer Flash-Speicher
Data logging
Zusätzlicher SAW-Filter
Zusätzlicher LNA
RTC Quarz
Interner Oszillator
Aktive Antenne/LNA integriert
Active antenna / LNA control
Antennen-Pin zur Erkennung von/zum Schutz vor Kurzschluss
Antennen-Pin zur Erkennung von Leerlauf
Other 
MärkteIndustrie, Wearables, Smart Cities, Einzelhandel

The UBX‑G8020‑KT GNSS chip, based on the latest u‑blox 8 position engine, supports GPS/QZSS, GLONASS, and SBAS. With superior sensitivity and acquisition times it sets new standards for single constellation receivers.
UBX‑G8020‑KT chip is targeted for applications where small size, high performance, minimal power, and low system costs all are a must. With a dedicated mode for wrist worn applications, UBX‑G8020‑KT is a perfect choice for wearable devices.
UBX‑G8020‑KT features low power consumption and supports advanced Power Save Modes. It also provides message integrity protection, geofencing, spoofing detection, odometer, and data logging functionalities.
The UBX‑G8020‑KT is available in an industry standard QFN package. Featuring built‑in LNA, LDOs and DC/DC converter, and a small external BOM, the UBX‑G8020‑KT enables ultra‑small solutions with a footprint of only ~50 mm2. By supporting TCXOs or lower price oscillators, the UBX‑G8020‑KT further ensures a minimal Total‑Cost‑of‑Ownership.
UBX‑G8020‑KT was built with backward compatibility in mind, thus simplifying migration from existing u‑blox G7020‑KT designs.
With its rigorous quality and manufacturing standards (AEC‑Q100, ISO/TS 16949), UBX‑G8020‑KT meets the requirements for industrial and consumer applications.