Skip to main content
P

UBX-G60x0 Automotive

u-blox 6 GPS- und Galileo-Chips (Automotive)

UBX‑G60x0 Automotive is an older generation product. For new designs see:
Flexible u-blox M8 GNSS-Chips

Highlights

  • Extrem grosse Flexibilität im Design
  • Kostengünstige Lösung für den Bereich Automotive
  • Unterstützt FW‑Upgrade1
  • Unterstützt ADR (Automotive Dead Reckoning) von u‑blox
  • Gemäss AEC‑Q100 qualifiziert
  • Hergestellt in gemäss ISO/TS 16949 zertifizierten Fabriken
6.5 x 8 x 0.85 mm

Produktvarianten

UBX-G6010-SA

u-blox 6 GPS Single-Chip, 56 Pin MLF

UBX-G6000-BA

u-blox 6 Baseband-Chip, 100 Pin CVBGA

UBX-G6010-QA

u-blox 6 RF Front-End Chip, 24 Pin MLF

ProduktvariantenUBX-G6010-SAUBX-G6000-BAUBX-G6010-QA
GPS-only
GNSS features 
OscillatorCrystal supported, TCXO supported
Area 
Global
Mikroprozessor 
Standalone module
Interfaces 
UART121
USB1
SPI1
DDC (I²C compliant)1
Electrical data 
Minimum supply [V]1.75
Maximum supply [V]3.6
Environmental data, quality & reliability 
Maximum temperature [°C]85
Minimum temperature [°C]-40
Size [mm]6.5 x 8 x 0.85
Features 
RTC Quarz
Aktive Antenne/LNA integriert
Zeitimpulsausgang
Ext. Unterbrechung/Wakeup
Programmierbarer Flash-Speicher
Zusätzlicher SAW-Filter
Zusätzlicher LNA
Interner Oszillator
Antennen-Pin zur Erkennung von/zum Schutz vor Kurzschluss
Antennen-Pin zur Erkennung von Leerlauf

Übersicht

Produktzusammenfassung

Hardware-Integrationshandbuch

AT Befehlshandbuch(CEL)

Anwendungshinweis

Whitepaper

Anwender-Führungshandbuch

Freigabe-Information

Informationsnotiz

Information zum Ende der Produktlebensdauer

Treiber

User Guide

Technical Note

The UBX‑G6010‑SA and UBX‑G6000‑BA / G0010‑QA automotive grade GPS chips from u‑blox meet the quality and reliability demands of automotive applications. The dedicated manufacturing process addresses automotive customers’ expectations for continuous support and operation over a long product life cycle. u‑blox 6 has been designed with low power consumption and low costs in mind. Intelligent power management is a breakthrough for low‑power applications. The minimal BoM requires as few as 16 passive components, an LDO and LNA are integrated and costly external memory is not needed. Lower price GPS crystals as well as TCXOs are supported, and 2‑layer PCB integration capability and small footprint ensure further cost savings. The UBX‑G6010‑SA is the ideal GPS chip solution for cost and space sensitive automotive applications, while the UBX‑G6000‑BA / G0010–QA supports external memory for firmware updates.