Skip to main content
Laden ...

Ihr Land

Ihr Land

Adresse ändern

You are here

Why LTE Cat M1 and LTE Cat NB1 make perfect sense for gas, water and heat metering

Juli 28, 2017
Water meter

As smart electricity metering rollouts progress across Europe, Asia and the United States, other utilities are looking to get in on the act. Those involved in water, gas and heat are now also seeking to take advantage of the benefits. There’s a key difference, however, between the smart meters used for electricity and those required for other utilities. This is around choosing suitable communications technology.

How smart meters for gas, water and heat are different
One reason for this is power. Electricity meters are connected to the grid, so benefit from an always‑on power source. Smart meters for other utilities must rely on batteries. What’s more, the high costs of replacing large numbers of batteries mean they must last at least 10 years and beyond, so energy must be used sparingly.

Power isn’t the only thing affecting the choice of communications solution. Electricity smart meters are required to play a part in data‑intensive real‑time grid monitoring and demand response management, but the requirements for water, heat and gas meters are different. These devices are primarily there to collect and transmit information and monitor for leaks, neither of which is particularly data‑heavy or real‑time‑dependent.

Lastly, smart meters for gas, heat and water are often in locations that make communication more challenging: some buried under the road, others deep inside buildings, possibly surrounded by concrete or other absorbing material.

Choosing the right communications technology
Rolling out smart metering represents a major outlay for utilities companies. To future‑proof their investments, any solution needs to be reliable and both vendor- and technology‑independent. On the communications side, this means using open standards that enable the smart metering platform to integrate with a range of communications systems.

Get this choice right, and the utilities providers can enjoy significant up‑front and ongoing savings. And the advent of 4G‑based low‑power wide‑area (LPWA) solutions means gas, water and heat meters no longer need to rely on traditional, costly and power‑hungry 2G/3G communications, meshed radio systems or stop over architectures.

There are two big players in the LPWA space: SigFox and LoRa, both proprietary technologies that typically use the unlicensed spectrum. Alongside these are the forthcoming 3GPP IoT technologies, which will use the licensed spectrum and are tuned to deliver on the varying requirements of the Internet of Things (IoT). These technologies standardized by 3GPP are divided into LTE Cat NB1 (also called Narrowband IoT, or NB‑IoT), and LTE Cat M1 (or enhanced machine‑type communications, eMTC).

LTE Cat M1 and Cat NB1: Ideal for utility metering
The 3GPP technologies deliver a blend of characteristics that’s ideally suited to gas, heat and water metering. They use widely available infrastructure, consume very little energy, keep device and deployment costs low, can reach deep within buildings and can support large numbers of units.

Currently, LTE Cat M1 is gaining most traction with network operators in the USA, while LTE Cat NB1 is being advanced in Europe, Asia and the Pacific region. Within the next 2 years, both are expected to be widely available.

Comparing LTE Cat NB1 with LTE Cat M1
Broadly speaking, LTE Cat NB1 is better able to penetrate into buildings, provides longer battery life and is more cost‑effective when it comes to design and implementation. This makes it ideal for the less‑frequent meter‑reading associated with gas, water and heat, particularly in residential applications.

LTE Cat M1’s key strengths are in its lower latency and higher bandwidth for data handling, making it a suitable choice where there’s a lot of interaction between the meter and the utility company, including in control applications and industrial scenarios.

The table below shows the specifications in detail and how LTE Cat M1 and LTE Cat NB1 compare:

 LTE Cat M1 and LTE Cat NB1

The technology in use
Both LTE Cat M1 and LTE Cat NB1 are undergoing trials in utility and metering applications, with u‑blox having been involved from the start.

Kamstrup and Diehl Metering are two major vendors in the utility sector pioneering LTE Cat NB1 technology, for example.

In Spain, Vodafone is trialling a large‑scale water meter implementation with Aguas de Valencia, which enables automated reading of several thousand units.

Verizon was the first telecoms provider in the USA to offer LTE Cat M1, and has since been joined by others. AT&T, for example, is launching trials with large meter vendors.

Australian telecoms companies are also rolling out LTE Cat M1 and LTE Cat NB1, with a notable trial involving sewage network monitoring.

These trials demonstrate that technologies using the licensed spectrum on public mobile networks are advancing rapidly. For those in the utilities sector, LTE Cat M1 and LTE Cat NB1 offer an ideal blend of capabilities to meet the challenging requirements of gas, water and heat smart metering.

For more information about u‑blox LTE Cat M1 and LTE Cat NB1 modules, visit our website.

Ludger Boeggering
Senior Professional Market Development - Product Strategy, Product Center Cellular, u-blox


by Patrick Mannion

The Security Manifesto and accompanying Digital Social Contract are an industry‑wide call to action from Arm’s CEO at the recent Arm TechCon, but developers have to act now, using available tools and pushing back to ge

November 17, 2017
Galileo Satellite Constellation by Lukas Rohr:


by Clemens Buergi

Two decades after it was first conceived, the Galileo global navigation satellite system is raining down its signals across the globe.

November 14, 2017
Connecting cars for over 12 years


by Thomas Nigg

The automotive industry found u‑blox sometime around 2005. It was neither anticipated nor planned, but looking back, it’s been a fantastic adventure. Since, we’ve sold dozens of millions of positioning and communication devices to automotive Tier Ones and OEMs.

November 07, 2017
dog tracker


by Florian Bousquet

GPS trackers – small, wearable devices used to track people, pets and animals – have made life easier for parents, pet owners, wildlife researchers, farmers, and businesses alike.

November 02, 2017
Arm TechCon

There’s a lot that goes into making IoT applications run smoothly and securely. From designing the hardware to ensuring robust connectivity, security, privacy, and data collection, the success of a prototype or of an end product hinges on cleanly clearing all of these hurdles. Sound daunting?

Oktober 25, 2017


by Florian Bousquet

From the Apple Watch, to the Samsung Gear and Huawei 2, more and more smartwatches are popping up every day on people’s wrists. What started as a luxurious fashion accessory is becoming increasingly respected as a useful wearable.

Oktober 18, 2017

u‑blox is demoing the long range connectivity of its newly launched, full‑featured Bluetooth 5 wireless MCU (microcontroller unit) module, NINA‑B3, at booth #1G44 of the

Oktober 04, 2017
Prototype shooting jacket that gives feedback on position and stability of the participant’s arm


by Paul Gough

Electronics and sportswear are not a natural combination. The materials are quite different; you have hard, rigid and fragile electronics compared to the soft, flexible, robust and washable textiles.

September 27, 2017
Home security


by Diego Grassi

The residential security and hybrid home automation market is currently in a state of transformation, as conventional anti‑intrusion technologies are giving way to a new generation of advanced smart home ecosystems.

September 19, 2017