u-blox M8 concurrent multi-GNSS receiver single-chips for automotive, industrial and consumer applications

UBX-M8030 concurrent multi-GNSS receiver chips

The UBX-M8030 is the newest generation of standalone positioning chips from u-blox. The high performance u-blox M8 position engine delivers exceptional sensitivity and acquisition times utilizing concurrent reception of GPS, QZSS, GLONASS and BeiDou satellite signals.

u-blox M8 chips feature low power consumption in concurrent reception mode, thanks to an innovative single-die architecture combined with sophisticated software algorithms. In cases where single constellation reception is acceptable, the total power consumption can be as low as 12 mW in Power Save Mode.

The extended voltage supply range and 1.8 V and 3.0 V I/O compliance support a wide variety of user applications. Sophisticated RF-Architecture and interference suppression using active CW jamming detection ensure maximum performance even in GNSS hostile environments.


u-blox M8 concurrent multi-GNSS receiver single-chips (UBX-M8030)

  • Concurrent reception of GPS (QZSS) and GLONASS or BeiDou,
    or concurrent GLONASS and BeiDou reception
  • Supports all SBAS
  • Galileo ready
  • Minimal board space, <30mm2
  • Combines low power consumption and high sensitivity
  • Minimal e-BOM, as few as 8 external parts
  • Exceptional jamming immunity


    • Receiver type
      • 72-channel u-blox M8 engine
      • GPS L1 C/A, GLONASS L10F
      • QZSS L1 C/A, BeiDou B1
      • Galileo-ready E1B/C (external FLASH required)
      • Time to first fix
        • Cold start: 26 s
        • Aided start: 2 s
        • Hot start: 1 s
      • Sensitivity
        • Tracking & Nav.: –167 dBm
        • Reacquisition: –160 dBm
        • Cold start: –148 dBm
        • Hot start: –156 dBm
      • Max nav. update rate
        • Single GNSS up to 18 Hz
        • Concurrent GNSS up to 10 Hz
      • Velocity accuracy: 0.1 m/s
      • Heading accuracy: 0.3 degrees
      • Horizontal position accuracy
        • 2.0 m CEP
      • Operational limits
        • Dynamics: < 4 g
        • Altitude: 50,000 m
        • Velocity: 500 m/s


      • UBX-M8030 Product Summary
      • The UBX-M8030 Data Sheet, Hardware Integration Manual,
        and Receiver Description Including Protocol Specification require
        an NDA and can be obtained by contacting u-blox

      New products