Frequently Asked Questions: ANTARIS FAQ

List of topics

1	Why is the receiver configuration lost after a power down?
2	Do you see issues with EGNOS?
3	What are the requirements for a gyro to work with TIM-LR or SBR-LS?
4	How do ANTARIS and ANTARIS 4 handle the Leap Second Changes?
5	Leap Second: Receiver outputs valid time and position but time is off by a few seconds
6	What is the MTBF (Mean Time Between Failure) of TIM, LEA and NEO GPS receivers?
7	How to connect a serial EEPROM to NEO-4S
8	What is the pad size of NEO, TIM and LEA modules?
9	Do ANTARIS and ANTARIS 4 Receiver have a problem with PRN 32?
10	What is the decoding of the sub frames for SBAS satellites in the RXM-SFRB message?
11	Questions about raw data output (RXM-RAW) of ANTARIS and RINEX conversion.
12	Updated Soldering Recommendations for RoHS
13	UTC Leap Seconds incorrectly shown in TIM-LH Firmware V3.10 (SuperSense)
14	Does FixNOW Mode work if receiver is connected via USB?
15	How reliable is WAAS?
16	When and what is the GPS week rollover problem and how will u-blox receivers behave?